heart beat.mp3
  • Currently /5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5
(2947)
avatar
July 31st, 2006

This was produced by tapping on a stethoscope which had an earbud pressed against a Shure SM57 mic. Low pass filter applied, as well as compression and a gate. Chorus added. Used a recording cassette deck as a preamp going into an M-Audio Audiophile USB soundcard.

Note: If you're having problems listening to this clip, the cutoff frequency of your speaker set may be too high(solution: new speakers). The signal strength exists almost entirely in the very low frequencies, so you may need a sub-woofer to hear it. Otherwise, try turning your speaker volume all the way up. Doing so may saturate the signal and at least allow you to hear the harmonics of the signal caused by the distortion. I don't recommend it, but you'll at least maybe be able to hear something.

Comments

  • avatar
    shadowstriker 7 years, 11 months ago

    Very realistic and clean. I like it!

  • avatar
    Seith 7 years, 11 months ago

    Nice nice nice :)

  • avatar
    ljudman 7 years, 11 months ago

    I also agree. Very nice!

  • avatar
    jrobertson 7 years, 11 months ago

    Agreed, best on the site. This is going to work nicely in some tension building pieces.

  • avatar
    elinoree 7 years, 11 months ago

    very useful... best "real" sounding heartbeat here.

Please log in to comment

Type
Mp3 (.mp3)
Duration
00:41:405
Filesize
1.6 MB
Bitrate
1378 kbps
Channels
Stereo
Sound illegal or offensive? Flag it!