LOM Geofon magnetically attached to a metal construction fence. Recorded with a Tascam FR-AV2
keng-wai-cha...
March 22nd, 2026
March 22nd, 2026
On the way to the supermarket with the Roland in its case with pick-up coil attached and placed in opposite pocket of coat. If you zoom close into …
L
lonerdroner
November 14th, 2023
November 14th, 2023
electromagnetic noise recorded with olympus lsp4 and Elektrousi from LOM. 96khz/24bit mono wav file. If you’re interested in how and where these sounds were recorded, feel free to …
Garuda1982
June 6th, 2023
June 6th, 2023
Contact mic recording of a large folding clothes hanger/dryer. Tapped and plucked on the stems for hanging clothes to create some weird drone and percussion sounds. Recorded with …
M
Morphic__
August 8th, 2022
August 8th, 2022
Recording of a kitchen sink filling and draining. This was recorded using a LOM Geofon contact microphone into a Sony PCM-A10.
M
Morphic__
August 5th, 2022
August 5th, 2022
Contact mic recording of an electric fan. Recorded at 24bit 96kHz with a LOM Geofon into a Sony PCM-A10
M
Morphic__
July 30th, 2022
July 30th, 2022
Contact mic recording of an electric fan. Recorded at 24bit 96kHz with a LOM Geofon into a Sony PCM-A10.
M
Morphic__
July 30th, 2022
July 30th, 2022
Electromagnetic recordings from a bus ride. Recorded with JrF modified coil pickup.
ilmari_frees...
April 7th, 2022
April 7th, 2022
Electromagnetic frequencies emitted by an old CFL bulb. Recorded with a Tascam DR-05X at 96000Hz, 32-bit.
clothespeg
April 1st, 2022
April 1st, 2022
exterior air vent/pipe creating low pulsating dark tones, could be used for creating interesting drones
SizEffects
January 17th, 2022
January 17th, 2022
A sample from an experimentation session with my MS-20.
T
toxyl
November 20th, 2021
November 20th, 2021
I took Felix Blume's Bee recording and slowed it down % 450. Pretty cool sound. Original sound: https://freesound.org/people/felix.blume/sounds/569181/
BaDoink
April 23rd, 2021
April 23rd, 2021
Captured using a Røde NT5 and a Zoom H6 recorder. Cutting and some denoising in iZotope RX7. Recorded as part of my "One sound per day 2018"-project. Would …
cabled_mess
March 25th, 2021
March 25th, 2021
Recorded using a Clippy EM172 and a Zoom H6 recorder. Cutting and some denoising in iZotope RX7. Recorded as part of my "One sound per day 2018"-project. https://youtu.be/f7CH6mn5IOo
cabled_mess
October 24th, 2019
October 24th, 2019