Sound of an old wooden spinning wheel, which is used to card wool and thus make threads, coats, sweaters, and also to make Aurora the sleeping beauty sink …
January 14th, 2025
The sound of a Lewenstein Melton sewing machine. This is the second short recording at slow speed. Other variations of this sound are available in the same sound-pack …
August 13th, 2023
edge lock blue tape from my parent's desk :3 recorded with AT2020USB+
August 10th, 2023
I cut heavy paper with scissors outside. I can hear a bird in a tree singing.
iphone recording of wood milling a door
February 8th, 2019
Binaural recording of a blacksmith entering his smithy, lighting the forge, heating metal and forging it with a hammer and the Billeter Klunz 50kg power hammer. Recorded in …
March 29th, 2017
Wameta TIG 1600 stopped. Recorded in 24-bit 96kHz with a Tascam DR-40 and a Sony ECM-NV1. For details on SOW: Blacksmith ed1 sound pack see: www.oree.storijapan.net/praxis/sound-of-work
March 29th, 2017
Torch ignited once and it sounds soft. Recorded in 24-bit 96kHz with a Tascam DR-40 and a Sony ECM-NV1. For details on SOW: Blacksmith ed1 sound pack see: …
March 29th, 2017
Billeter Klunz 50kg flat belt drive full for single shot. Recorded in 24-bit 96kHz with a Tascam DR-40 and a Sony ECM-NV1. For details on SOW: Blacksmith ed1 …
March 29th, 2017
Hempstead Ata Hemel st24le straight die grinder running freely, short. Recorded in 24-bit 96kHz with a Tascam DR-40 and a Sony ECM-NV1. For details on SOW: Blacksmith ed1 …
March 29th, 2017
Ingersoll Rand riveting hammer started once against a metal plate and it sounds tight. Recorded in 24-bit 96kHz with a Tascam DR-40 and a Sony ECM-NV1. For details …
March 29th, 2017
Unbranded needlegun scaler started once against a metal plate. Recorded in 24-bit 96kHz with a Tascam DR-40 and a Sony ECM-NV1. For details on SOW: Blacksmith ed1 sound …
March 29th, 2017
Chicago Pneumatic model A impact wrench started once against a sheet of metal. Recorded in 24-bit 96kHz with a Tascam DR-40 and a Sony ECM-NV1. For details on …
March 29th, 2017
Deprag zn231 pneumatic hammer started once and it sounds high. Recorded in 24-bit 96kHz with a Tascam DR-40 and a Sony ECM-NV1. For details on SOW: Blacksmith ed1 …
March 29th, 2017
Atlas Copco bv7 pneumatic blowing a raspberry, first cycle is longer. Recorded in 24-bit 96kHz with a Tascam DR-40 and a Sony ECM-NV1. For details on SOW: Blacksmith …
March 29th, 2017